Lihlahisoa

HL-1 Pinch Off Locking Plier

Likaroloana:

Ho Loma ka Matla, Ho Loma ha bonolo

Litšepe tsa alloy tse nang le mocheso o phahameng oa boemo bo phahameng bakeng sa ho tiea ho hoholo le ho tšoarella
Hex key adjusting screw, Ho fihlella habonolo ho boholo bo nepahetseng ba ho notlela
Sesebelisoa sa ho notlolla kapele, phihlello e bonolo ea tokollo ea molaoli

patlisiso dintlha
HW-1 HW-2 Rachet Wrench

Likaroloana:

E bonolo, e bonolo ho e sebelisa

Ka 25° angulation, E hloka sebaka se senyenyane sa mosebetsi bakeng sa ho qhekella
Ketso e potlakileng e nang le li-reverse levers lipheletsong ka bobeli

patlisiso dintlha
HP-1 Tube Piercing Plier

Likaroloana:

E bohale, E tšoarella

Nale e thata e phahameng, E entsoe ka tšepe ea alloy tungsten
E etselitsoe ho notlela kapele le ho phunya tube ea sehatsetsing
Hlaba tšupu ea sehatsetsi 'me u khutlise sehatsetsi sa khale hang-hang.
E entsoe ka tšepe e kopantsoeng le mocheso oa maemo a holimo bakeng sa ho tšoarella.

patlisiso dintlha
ALD-1 Infrared Refrigerant Leak Detector

Mofuta oa Sensor oa ALD-1: Infrared sensor Minimum Detectable Leakage: ≤4 g / selemo Nako ea Karabelo: ≤1 metsotsoana Preheating Nako: metsotsoana ea 30 Mokhoa oa Alarm: Alamo e utloahalang le e bonahalang;TFT e bontšang Operating Temperature Range: -10-52℃ Operating Humidity Range: <90%RH(non-condensing) Sehatsetsing se Sebeletsang: CFCs, HFCs, HCFC Blends le HFO-1234YF Sensor Nako ea Bophelo: ≤10 lilemo Litekanyo: 2x9x3mm7mm. x 2.8″x 1.4″) Boima ba 'mele: 450g Betri: 2x 18650 e ka nchafatsoang...

patlisiso dintlha
ALD-2 Heated Diode Refrigerant Leak Detector

Mofuta oa Sensor sa Moetso oa ALD-2: Sensor e futhumatsang ea diode Gase e Dutla Bonyane: ≤3 g/selemo Nako ea ho Etsa: ≤3 metsotsoana Nako ea ho futhumatsa: metsotsoana e 30 Nako ea ho Beha Botjha: ≤10 metsotsoana Bophahamo ba Mocheso: 0-50℃ Mokhoa oa ho sebetsa oa Mongobo : <80%RH(non-condensing) Sehatsetsi se Sebeletsang: CFCs, HCFCs, HFCs, HCs le HFOs Sensor Lifetime: ≥1 selemo Reset: Automatic / Manual Probe Length: 420mm(16.5in) Betri: 3 X AA betri ea alkaline,7 lihora tse tsoelang pele ho sebetsa

patlisiso dintlha
ASM130 Sound Level Meter

LCD backlight

Karabelo e potlakileng le e liehang

E nkehang

Sensor ea molumo e nepahetseng haholo

patlisiso dintlha
Sesebelisoa sa Lebota sa AWD12

Model AWD12 Sebetsa tšepe 120mm Non-ferrous (koporo) 100mm Alternating jwale (ac) 50mm Copper terata (≥4 limilimithara 2 ) 40mm 'mele kantle ho naha mokhoa o tobileng 20mm, tebileng mode 38mm (Ka kakaretso e bua ka boloko lehong) 0-85%RH ka mokhoa oa tšepe, 0-60% RH ka mokhoa oa 'mele o tsoang linaheng tse ling Mongobo oa ho sebetsa -10℃~50℃ Mocheso o sebetsang oa mocheso -20°C～70℃ Battery: 1X9 volt dry battery Nako ea ts'ebeliso e ka bang lihora tse 6 Boholo ba 'mele 147*68* 27 limilimithara

patlisiso dintlha
ADA30 Digital Anemometer

LCD backlight

Karabelo e potlakileng

E nkehang

Sensor e phahameng e nepahetseng ea lebelo la moea

Sensor e phahameng ea mocheso o nepahetseng

patlisiso dintlha
ADC400 Digital Clamp Meter

Fast capacitance measure

Alamo ea pono ea molumo bakeng sa ts'ebetso ea NCV

Tekanyo ea 'nete ea RMS

Tekanyo ea maqhubu a motlakase oa AC

Pontšo e kholo ea LCD

Tšireletso e felletseng ea ho fumana leshano

Pontsho ya overcurrent

patlisiso dintlha
AIT500 Infrared Thermodetector

Mocheso oa thepa ea HVAC

Mocheso oa holim'a lijo

Ho omisa mocheso oa ontong

patlisiso dintlha
ADM750 Digital Multimeter

2m ho theoha teko

LCD backlight

Ho fumanoa ha NCV

Data hold

hFE tekanyo

Tekanyo ea mocheso

patlisiso dintlha
Adaper ea Battery ea Li-ion e fetolehang BA-1/BA-2/BA-3/BA-4/BA-5/BA-6/BA-7

Likaroloana:

Khetho e mengata & e bonolo

E loketse bakeng sa tshebediso ya profeshenale le letsatsi le letsatsi.Ho bonolo ho kenya le ho sebedisa.
Fetolela AEG /RIDGID Interface ho betri e fapaneng bakeng sa ts'ebeliso e se nang moeli

patlisiso dintlha